Locking Clip
Locking Clip to prevent accidental pipework disconnection.
Polypropylene End Stop
Disclaimer: All images are for illustrative purposes only.
You will also need:
Quickly and safely caps off unused pipework ends
John Guest push-fit polypropylene end stop fitting quickly and safely cap off pipework termination points on temporary or permanent basis. Fast and simple to install, John Guest push-fit fittings create an instant push-fit connection and leak tight seal without the need for tools, hot works or sealing agents.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with EPDM O-Rings, the fitting offers greater chemical resistance than push-fit acetal and is suitable for potable water (10 bar at 20°C) and intermittent hot water applications (4 bar at 60°C), as well as water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
The unique collet locking design firmly and securely holds the pipe in place without deforming the pipe or restricting flow. Fittings are corrosion resistant and fully demountable, improving system performance and reducing system downtime during maintenance.
Manufactured in polypropylene with EPDM O-Rings, the fitting offers greater chemical resistance than push-fit acetal and is suitable for potable water (10 bar at 20°C) and intermittent hot water applications (4 bar at 60°C), as well as water treatment and purification applications. All John Guest fittings are manufactured and assembled in the UK.
Features and benefits
- Polypropylene material and EPDM O-Ring offers high chemical resistance
- Suitable for potable water, intermittent hot water (up to 65°C max) water treatment and purification applications (Not suitable for compressed air or vacuum applications)
- Instant push-fit connection and leak tight seal
- Connect, disconnect and reconnect in seconds without tools
- No scale build up improves performance and equipment lifespan
- Superior flow characteristics
- Compatible with LLDPE or soft metal pipe/tube
Accreditations
| SKU | Description | Tube OD ″ | Accreditations |
|---|---|---|---|
| PP4608W | John Guest Polypropylene End Stop 1⁄4″ | 1⁄4 | BSI WRAS |
Application
Suitable for potable water, intermittent hot water and water treatment applications (such as softening, conditioning, filtration, reverse osmosis, cleaning and sanitising)
Purpose
Quickly and safely caps off unused pipework ends
Compatibility
Suitable for use with soft metal or plastic tubing
Technology
Standard
Guarantee
Guaranteed for 2 years
