JG Lowfit kitchen

Maximum warmth, minimal height

Underfloor heating system for retrofits and new builds.

Watch JG Lowfit - Trusted quality, that's easy to fit on YouTube.

Why installers prefer JG LowFit?

JG Underfloor systems are fast and simple to install using JG Speedfit push-fit connections and JG Underfloor heating controls. Plus, you also get a system guarantee and free technical support for extra peace of mind.

Closeup of the caps on a manifold

Success stories

See what UFH installers and engineers are saying about JG LowFit.

Versatile low-profile underfloor heating systems that can be installed anywhere

Discover JG LowFit, the easy-to-install low-profile underfloor heating system that offers maximum warmth and minimal floor height build-up. From new build to retrofit projects, we offer a range of solutions for upstairs and downstairs installation.

Watch JG LowFit™ – Installing the foiled floor panels on YouTube.

16mm Foiled Panel - Timber Floors

Designed to fit upstairs over timber subfloors, ideal for carpet, laminate and wooden flooring.

Download datasheet Pdf
Watch JG LowFit™ – Installing the fibre mesh floor panels on YouTube.

16mm Fibre Mesh Panel - Timber Floors

Designed to fit upstairs over timber subfloors, ideal for tile, stone and ceramic flooring.

Download datasheet Pdf
Watch JG LowFit™ – Installing the 16mm castellated floor panels on YouTube.

16mm Castellated Panel - Screed Floors

Designed to fit downstairs over concrete subfloors, suitable for retrofits and any floor covering.

Download datasheet Pdf
Watch JG LowFit™ – Installing the 20mm castellated floor panels on YouTube.

20mm Castellated Panel - Screed Floors

Designed to fit downstairs over concrete subfloors, suitable for new builds and any floor covering.

Download datasheet Pdf

Easy to install, saving you time while
reducing labour costs and hassle.

Lays on top

Lays on top of the
existing floor

Pre grooved

Pipe-grooved
pipe routes and grids

Pipe

Ultra-flexible
pipe makes pipe laying a breeze

Thermostat v2

Simple to install push-fit manifolds
& heating controls

JG Underfloor FAQs

This will depend on how often the UFH system is maintained and the environment where the heating controls, manifold and wiring centre are installed. It's essential that these components are housed in areas where accidental damage is unlikely to occur. We recommend that the system is checked every 12 months by a qualified heating engineer to ensure that it is working correctly and efficiently.

Yes, we offer a free underfloor heating (UFH) design service. Please contact one of our UFH experts.

Underfloor heating systems (UFH) are commonly retrofitted using existing boilers, however, the output capacity may require the pipe size to be reduced, as well as the working flow rate for each heating zone. The flow rate should be calculated by a qualified heating engineer to ensure maximum efficiency and performance. For further guidance, please speak to our experts.

This is normally decided by the architect and builder based on the structural loading of the building. Speedfit underfloor heating systems (UFH) is suited for all modern applications.

Yes, air source heat pumps (ASHP) and ground source heat pumps (GSHP) are ideal for underfloor heating systems (UFH). In order to integrate underfloor heating systems (UFH) efficiently, please refer to the heat pump manufacturer's instructions.

Find out more

Get in touch with an underfloor heating expert, request a free quote or a bespoke CAD drawing.