LLDPE tubing 15mm OD x 11.5mm ID - 100m

LLDPE tubing
Disclaimer: All images are for illustrative purposes only.

LLDPE tubing for compressed air and pneumatics micro bore piping applications.

John Guest LLDPE (linear low density polyethylene pipe) is suitable for a wide range of temperature and pressures, has broad chemical compatibility and is made from non-contaminating materials. It is compatible with pneumatics applications with a maximum pressure 10 bar @ 20°C. At elevated temperatures (50°C), mineral oil used in some systems will degrade LLDPE tubing. Therefore, LLDPE tubing used in pneumatic circuits should be periodically checked and replaced if necessary.

Chemical Resistance
For use of LLDPE with chemicals or potentially aggressive liquids, please refer to our Technical Service Department. When using cleaning agents or other potentially aggressive liquids, please ensure compatibility with pipe and fittings. LLDPE is not recommended for mineral oils, gases and fuels or high pressure compressed air/pneumatic systems.

Exposure to Ultraviolet Light
If biofilm growth is considered an issue, only black pipe should be installed in areas exposed to any light. Black pipe is also UV stabilised and can be installed where exposed to direct sunlight (UV).

Features and benefits

  • Flexible and robust LLDPE (Linear low density polyethylene) pipe
  • Suitable for air and pneumatics, cold, and intermittent hot water applications
  • Broad chemical compatibility
  • Colour coded for easy identification of service type
  • FDA and NSF certified


BSI Thermo Pipes and Fixings accredited
SKUDescriptionPipe OD mmPipe ID mmLength mQuantity per bagAccreditations
PE-15115-0100M-BLLDPE tubing 15mm OD × 11.5mm ID - 100m - Blue1511.51001
PE-15115-0100M-ELLDPE tubing 15mm OD × 11.5mm ID - 100m - Black1511.51001
PE-15115-0100M-GLLDPE tubing 15mm OD × 11.5mm ID - 100m - Green1511.51001
PE-15115-0100M-RLLDPE tubing 15mm OD × 11.5mm ID - 100m - Red1511.51001