5 ways JG Speedfit is helping you out of tight space plumbing projects

push fit plumbing toolbox

We’ve all been there. You turn up to one of your first-fix plumbing projects only to discover that the space you have to work in is extremely tight and difficult to work in.

Before you know it, you’re working underneath a floorboard plumbing between joists, or threading pipes through a wall behind a kitchen sink, with very little room to manoeuvre. And as modern buildings are built in favour of style over convenience, these spaces are only becoming tighter. Few customers want pipework on display anymore, meaning that a plumber’s work is often hidden out of sight in small spaces in and around a building.

Fear not! There is one way out of this tight space. Whilst some plumbers and installers still struggle with rigid copper pipes, and multiple tools, many have already embraced the flexibility and versatility of plastic pipes and fittings such as those in our JG Speedfit range.

Here are just five ways that plastic plumbing products can help you out of a tight space:

1. You can leave the plumbing tools at home

A plumber’s van can be very low on storage space when copper is favoured over plastic fittings.

Not only do they need to store fittings and pipes, but all the tools required to connect and install these as well. Specialist cutting tools are required, and blow torches must be carried around to make connections, not to mention the various sealing agents that plumbers need to have access to. These all must be transported from the van to the site, but where do you put them when the only storage space you have is the few metres between you and the pipework?

 

Using plastic pipes and fittings

 

A plumber using plastic pipes and fittings has a much lighter van, and considerably fewer tools to carry. This is because plastic pipes and fittings by JG Speedfit do not require any specialist tools to install. In fact, with our revolutionary push-fit fittings, you only need your hands and a sense of touch to make a secure, leak proof connection.

When inserting a pipe into a fitting, a screw cap is placed in an unlocked position, allowing the pipe to be easily inserted as the collet allows for low insertion force. Once the pipe is fully connected, the nut is rotated and this important twist & lock® action is what causes the internal components of the push-fit to compress, creating a leak proof connection without the use of tools.

lighten the load on tight space plumbing projects

2. Lighten the load with plastic pipes

Further reducing the volume of products that a plumber needs to take onto a site, plastic pipes can often cover more ground than copper alternatives. Single plastic pipes can be installed over longer distances than copper pipes, which are often only available in maximum lengths. In contrast, it is possible to have a 300m coil of plastic pipe which you can stretch across a floor for an underfloor heating installation. Longer pipes mean fewer connections are required, which ultimately means that a plumber needs to transport fewer fittings to a job.

In contrast, it is possible to have a 300m coil of plastic pipe which you can stretch across a floor for an underfloor heating installation. Longer pipes mean fewer connections are required, which ultimately means that a plumber needs to transport fewer fittings to a job.

Push fit plumbing with man under sink

3. Greater flexibility with Speedfit fittings

When faced with a tight working space, it is important to ensure that you have as much flexibility as possible when performing an install. This can be difficult to achieve with pipes and fittings that are not manufactured from plastic. Plastic is a flexible and versatile material and products such as JG Speedfit’s Layflat pipe can be easily threaded through joists and small spaces where copper pipes cannot.

It’s not uncommon with modern buildings to have one installer threading a plastic pipe from one floor, down to a colleague on the floor below. Likewise, lots of modern pipework is now installed inside airing cupboards, where pipes need to be threaded down to floors.

larger choice of plastic pipes and fittings

4. A larger choice means for more effective plumbing projects

It is widely acknowledged in the industry that there is much greater choice afforded to plumbers when they choose to work with plastic pipes and fittings, than if they select copper products. Furthermore, plastic fittings become even more versatile when you start to introduce reducers.

These allow for a change in pipe size to meet the specific hydraulic flow requirements of a plumbing system, whilst also enabling plumbers to adapt fittings to existing piping of a different size. When you add this versatility to a range of pipes and fittings that are already vast, you can always find the right products for each individual job.

easily installing plastic pipes and fittings in ceiling

5. You can make connections with your eyes closed

OK, so you probably shouldn’t go around installing pipework with your eyes shut, but there are some instances when working in tight spaces where you may not be able to physically see the pipes you are connecting. 

This can make soldering copper pipes together something of an impossibility, but with plastic, it’s not a problem. Whilst it is important to perform a visual check to ensure that there is no insertion gap when connecting pipes, this is not always possible.

For example, you may be working on a cold building site at 6 am on a January morning on a stepladder. With plastic push-fits, you can be assured that 99.9% of the time, when you twist & lock® the fitting, a secure connection has been made, due to the unique design of the push-fit, and the compression lock that it creates.

Plastic Pipes and Fittings for Plumbing Projects

That’s just five ways our plastic pipes and fittings are making plumber’s lives easier as the industry is being forced to work in tight spaces for plumbing projects. JG Speedfit plastic fittings revolutionise the plumbing industry with their convenience, reliability, and sustainability. Whether you're a professional plumber or a homeowner tackling a DIY project, these fittings provide a user-friendly and durable solution. Upgrade your plumbing system with JG Speedfit and experience the difference for yourself.

Discover our range

The ultimate plastic push-fit system, providing fast, simple and secure connections for plumbing and heating applications.

Richard Bateman Headshot

Richard Bateman

Product Marketing Manager Plumbing and Heating

About the author

A highly experienced and passionate professional, I have over 15 years' experience as a commercial and domestic plumber and hold NVQ Level 3 qualifications from City and Guilds

Since joining RWC in 2015, I began as a technical engineer, utilising my extensive knowledge to provide exceptional support. Currently, I am thrilled to be working with the marketing department as a Product Marketing Manager. 

This role allows me to combine my technical background with a keen eye for market trends, ensuring that RWC's products meet the evolving needs of the industry. With my wealth of experience and commitment to excellence, I am proud to serve as a spokesperson for RWC, sharing our innovative solutions and contributing to the growth of the plumbing and heating sector.