Angle Stop Valve

Angle Stop Valve
Disclaimer: All images are for illustrative purposes only.

You will also need:

15mm Pipe Insert

Pipe Insert

Pipe liner for PB & PEX barrier pipe. Prevents over constriction of pipe from compression fittings. Suitable for hot, cold & heating applications.
15mm Superseal Pipe Insert

Superseal Pipe Insert

Multi-seal pipe liner for Speedfit pipe. Prevents over constriction of pipe when compressed. Suitable for hot, cold & heating applications.

Provides an inline connection with shut off and integrated check valve

JG Speedfit angle stop valve for connecting American fridge-freezers, water filtration equipment and vending machines. The 2-in-1 push-fit fitting has a shut off valve for isolating water during installation or maintenance work and a check valve to prevent backflow and the risk of contamination.

Simply push the JG Speedfit angle stop valve fully onto the pipe. To demount the connection, push the collet towards the body of the push-fit fitting and pull the pipe to release. The push-fit fitting is up to 40% faster to install than traditional methods and is easier to use in confined spaces by removing the need for hot works and tools. Designed, manufactured and assembled in the UK.

Features and benefits

  • 2-in-1 shut off valve and check valve for isolation and backflow prevention
  • Install and demount in seconds without tools
  • Safe flame-free installation, with no hot works, glue or flux
  • Integrated ¼ turn handle instantly isolates water
  • Grip & Seal™ collet with stainless steel teeth and main O-Ring seal
  • Compatible with Speedfit PEX and polybutylene plastic pipe (inserts required) and copper pipe
  • Suitable for hot and cold water (not suitable for central heating systems)
SKUDescriptionSize mmBSP ″Quantity per bagQuantity per box
ASV3JG Speedfit Angle Stop Valve 15mm × 1⁄4″151⁄4130
ASV4JG Speedfit Angle Stop Valve 15mm × 3⁄8″153⁄8125