Spreader Plates from above are designed for use with timber suspended or floating floors. 15mm JG Layflat® pipe is installed into single or double grooved aluminium spreader plates that transmits heat evenly across the finished floor surface. For existing floor structures install between battens and for new floors fix between existing joists. If the floor can be raised, floors can also be counter-battened to make installation even easier.
Benefits of UFH Spreader Plates Above
- Aluminium heat diffusion plate & grooved insulation
- Easy install across timber joists or onto battens
- Medium heat output & response
- Low height build up
- New builds & extensions
- Ideal for upper floor levels
- Installing above traditional block & beam joists
- Single or multi rooms
- Good for rooms of all sizes
- When low profile is required
Installing Underfloor Heating Spreader Plates
Insulation is installed below the plates and it is important that the floor decking is in contact with the plate to maximise output. Alternatively, where there will be a secondary layer of floor placed above a sheet sub floor, the plates can be sandwiched between the floor layers supported on battens. With a twin layer floor this second method is recommended as it removes a layer of resistance to heat transfer.
More Information on Speedfit Underfloor Heating
Find out more product and technical information and installation advice >